[求助] 为什么我的/www/wdlinux/etc/php-fpm.conf内容不一样

2878505611

我有2个服务器按照了wdcp

A服务器的/www/wdlinux/etc/php-fpm.conf配件文件内容这样：

1. ;;;;;;;;;;;;;;;;;;;;;
   
2. ; FPM Configuration ;
   
3. ;;;;;;;;;;;;;;;;;;;;;
   
4. 
   
5. ; All relative paths in this configuration file are relative to PHP's install
   
6. ; prefix (/www/wdlinux/nginx_php-5.3.29). This prefix can be dynamicaly changed by using the
   
7. ; '-p' argument from the command line.
   
8. 
   
9. ; Include one or more files. If glob(3) exists, it is used to include a bunch of
   
10. ; files from a glob(3) pattern. This directive can be used everywhere in the
    
11. ; file.
    
12. ; Relative path can also be used. They will be prefixed by:
    
13. ;  - the global prefix if it's been set (-p arguement)
    
14. ;  - /www/wdlinux/nginx_php-5.3.29 otherwise
    
15. ;include=etc/fpm.d/*.conf
    
16. 
    
17. ;;;;;;;;;;;;;;;;;;
    
18. ; Global Options ;
    
19. ;;;;;;;;;;;;;;;;;;
    
20. 
    
21. [global]
    
22. ; Pid file
    
23. ; Note: the default prefix is /www/wdlinux/nginx_php-5.3.29/var
    
24. ; Default Value: none
    
25. ;pid = run/php-fpm.pid
    
26. 
    
27. ; Error log file
    
28. ; If it's set to "syslog", log is sent to syslogd instead of being written
    
29. ; in a local file.
    
30. ; Note: the default prefix is /www/wdlinux/nginx_php-5.3.29/var
    
31. ; Default Value: log/php-fpm.log
    
32. ;error_log = log/php-fpm.log
    
33. 
    
34. ; syslog_facility is used to specify what type of program is logging the
    
35. ; message. This lets syslogd specify that messages from different facilities
    
36. ; will be handled differently.
    
37. ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    
38. ; Default Value: daemon
    
39. ;syslog.facility = daemon
    
40. 
    
41. ; syslog_ident is prepended to every message. If you have multiple FPM
    
42. ; instances running on the same server, you can change the default value
    
43. ; which must suit common needs.
    
44. ; Default Value: php-fpm
    
45. ;syslog.ident = php-fpm
    
46. 
    
47. ; Log level
    
48. ; Possible Values: alert, error, warning, notice, debug
    
49. ; Default Value: notice
    
50. ;log_level = notice
    
51. 
    
52. ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    
53. ; interval set by emergency_restart_interval then FPM will restart. A value
    
54. ; of '0' means 'Off'.
    
55. ; Default Value: 0
    
56. ;emergency_restart_threshold = 0
    
57. 
    
58. ; Interval of time used by emergency_restart_interval to determine when
    
59. ; a graceful restart will be initiated.  This can be useful to work around
    
60. ; accidental corruptions in an accelerator's shared memory.
    
61. ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    
62. ; Default Unit: seconds
    
63. ; Default Value: 0
    
64. ;emergency_restart_interval = 0
    
65. 
    
66. ; Time limit for child processes to wait for a reaction on signals from master.
    
67. ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    
68. ; Default Unit: seconds
    
69. ; Default Value: 0
    
70. ;process_control_timeout = 0
    
71. 
    
72. ; The maximum number of processes FPM will fork. This has been design to control
    
73. ; the global number of processes when using dynamic PM within a lot of pools.
    
74. ; Use it with caution.
    
75. ; Note: A value of 0 indicates no limit
    
76. ; Default Value: 0
    
77. ; process.max = 128
    
78. 
    
79. ; Specify the nice(2) priority to apply to the master process (only if set)
    
80. ; The value can vary from -19 (highest priority) to 20 (lower priority)
    
81. ; Note: - It will only work if the FPM master process is launched as root
    
82. ;       - The pool process will inherit the master process priority
    
83. ;         unless it specified otherwise
    
84. ; Default Value: no set
    
85. ; process.priority = -19
    
86. 
    
87. ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    
88. ; Default Value: yes
    
89. ;daemonize = yes
    
90. 
    
91. ; Set open file descriptor rlimit for the master process.
    
92. ; Default Value: system defined value
    
93. ;rlimit_files = 1024
    
94. 
    
95. ; Set max core size rlimit for the master process.
    
96. ; Possible Values: 'unlimited' or an integer greater or equal to 0
    
97. ; Default Value: system defined value
    
98. ;rlimit_core = 0
    
99. 
    
100. ; Specify the event mechanism FPM will use. The following is available:
     
101. ; - select     (any POSIX os)
     
102. ; - poll       (any POSIX os)
     
103. ; - epoll      (linux >= 2.5.44)
     
104. ; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
     
105. ; - /dev/poll  (Solaris >= 7)
     
106. ; - port       (Solaris >= 10)
     
107. ; Default Value: not set (auto detection)
     
108. ; events.mechanism = epoll
     
109. 
     
110. ;;;;;;;;;;;;;;;;;;;;
     
111. ; Pool Definitions ;
     
112. ;;;;;;;;;;;;;;;;;;;;
     
113. 
     
114. ; Multiple pools of child processes may be started with different listening
     
115. ; ports and different management options.  The name of the pool will be
     
116. ; used in logs and stats. There is no limitation on the number of pools which
     
117. ; FPM can handle. Your system will tell you anyway :)
     
118. 
     
119. ; Start a new pool named 'www'.
     
120. ; the variable $pool can we used in any directive and will be replaced by the
     
121. ; pool name ('www' here)
     
122. [www]
     
123. 
     
124. ; Per pool prefix
     
125. ; It only applies on the following directives:
     
126. ; - 'slowlog'
     
127. ; - 'listen' (unixsocket)
     
128. ; - 'chroot'
     
129. ; - 'chdir'
     
130. ; - 'php_values'
     
131. ; - 'php_admin_values'
     
132. ; When not set, the global prefix (or /www/wdlinux/nginx_php-5.3.29) applies instead.
     
133. ; Note: This directive can also be relative to the global prefix.
     
134. ; Default Value: none
     
135. ;prefix = /path/to/pools/$pool
     
136. 
     
137. 
     
138. 
     
139. ; The address on which to accept FastCGI requests.
     
140. ; Valid syntaxes are:
     
141. ;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
     
142. ;                            a specific port;
     
143. ;   'port'                 - to listen on a TCP socket to all addresses on a
     
144. ;                            specific port;
     
145. ;   '/path/to/unix/socket' - to listen on a unix socket.
     
146. ; Note: This value is mandatory.
     
147. listen = 127.0.0.1:9000
     
148. 
     
149. ; Set listen(2) backlog. A value of '-1' means unlimited.
     
150. ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
     
151. ;listen.backlog = -1
     
152. 
     
153. 
     
154. （字数限制，删除部分）
     
155. ;php_admin_value[error_log] = /var/log/fpm-php.www.log
     
156. ;php_admin_flag[log_errors] = on
     
157. ;php_admin_value[memory_limit] = 32M
     
158.         

复制代码

B服务器的/www/wdlinux/etc/php-fpm.conf的配置文件内容：

1. <?xml version="1.0" ?>
   
2. <configuration>
   
3.         All relative paths in this config are relative to php's install prefix
   
4.         <section name="global_options">
   
5.                
   
6. 
   
7.                                 Sets the limit on the number of simultaneous requests that will be served.
   
8.                                 Equivalent to Apache MaxClients directive.
   
9.                                 Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
   
10.                                 Used with any pm_style.
    
11.                                 <value name="max_children">80</value>
    
12. 
    
13.                                 （字数限制，删除部分）
    
14. 
    
15.                                 </value>
    
16. 
    
17.                         </value>
    
18. 
    
19.                
    
20.                         <value name="request_terminate_timeout">180s</value>
    
21. 
    
22. 
    
23. </configuration>        

复制代码

两个服务器引擎都是 nginx+apache。
请问这个是什么原因？

还有一个问题，上传表格老是504错误，按照网站教程，好多参数都设置了大于100秒了，可是上传表格执行到30秒 就504.